DseWiki: MarkusRechberger/TerratecCinergy400cardbus

Veränderung (zum vorhergehenden Autor) (Änderung, Korrektur, Normalansicht)

Verändert: 1c1,59

Beschreibe hier die neue Seite.

Die PCMCIA TV Karte funktioniert noch nicht einwandfrei, man bekommt derzeit mit folgenden Treibermodifikationen in den sa7134* kernel files nur ein Flimmern, mit tuner 8 kann man auch Frequenzen ändern nur welche ist die Frage..
AverMedia? AverTV? Cardbus funktioniert derzeit überhaupt nicht, da anscheinend der Tuner nicht initialisiert werden kann.. specs wären hilfreich..

[[Code]
Hello,
I'm trying to get my Cinergy 400 TV mobile (PCMCIA!) to work. It's equipped
with a SAA7133 chip, which is recognized by the saa7134 kernel module. The
card was not autodetected, so I added a new card in saa7134-cards.c, for
experimenting I just copied the entry of the Cinergy400 PCI card and added it
at the end of saa7134_boards[]:

[{SAA7134 BOARD CINERGY400M}?] = {
.name = "Terratec Cinergy 400 TV mobile",
.audio_clock = 0x00200000,
.tuner_type = {TUNER PHILIPS PAL}?,
.inputs = {{
.name = name_tv,
.vmux = 1,
.amux = TV,
.tv = 1,
},{
.name = name_comp1,
.vmux = 4,
.amux = LINE1,
},{
.name = name_svideo,
.vmux = 8,
.amux = LINE1,
},{
.name = name_comp2, // CVideo over SVideo Connector
.vmux = 0,
.amux = LINE1,
}}
}

Then, I added an entry at the end of saa7134_pci_tbl[]:
{
.vendor = {PCI VENDOR ID PHILIPS}?,
.device = {PCI DEVICE ID PHILIPS SAA7133}?,
.subvendor = 0x153b,
.subdevice = 0x1162,
.driver_data = {SAA7134 BOARD CINERGY400M}?,
}

And the define in saa7134.h:

#define {SAA7134 BOARD CINERGY400M}? 34
]

[[Code]
case {SAA7134 BOARD CINERGY400M}?:
/* power-up tuner chip */
saa_andorl({SAA7134 GPIO GPMODE0}? >> 2, 0x00040000, 0x00040000);
saa_andorl({SAA7134 GPIO GPSTATUS0}? >> 2, 0x00040000, 0x00000000);
break;
} return 0;
}
]

Hello, I'm trying to get my Cinergy 400 TV mobile (PCMCIA!) to work. It's equipped with a SAA7133 chip, which is recognized by the saa7134 kernel module. The card was not autodetected, so I added a new card in saa7134-cards.c, for experimenting I just copied the entry of the Cinergy400 PCI card and added it at the end of saa7134_boards[]: [SAA7134_BOARD_CINERGY400M] = { .name = "Terratec Cinergy 400 TV mobile", .audio_clock = 0x00200000, .tuner_type = TUNER_PHILIPS_PAL, .inputs = {{ .name = name_tv, .vmux = 1, .amux = TV, .tv = 1, },{ .name = name_comp1, .vmux = 4, .amux = LINE1, },{ .name = name_svideo, .vmux = 8, .amux = LINE1, },{ .name = name_comp2, // CVideo over SVideo Connector .vmux = 0, .amux = LINE1, }} } Then, I added an entry at the end of saa7134_pci_tbl[]: { .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x153b, .subdevice = 0x1162, .driver_data = SAA7134_BOARD_CINERGY400M, } And the define in saa7134.h: #define SAA7134_BOARD_CINERGY400M 34

case SAA7134_BOARD_CINERGY400M: /* power-up tuner chip */ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000); saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000000); break; } return 0; }