Markus Rechberger / Notebook
 
StartSeite | MarkusRechberger/ | Neues | TestSeite | ForumSeite | Teilnehmer | Kategorien | Index | Hilfe | Einstellungen | Ändern

Veränderung (letzte Änderung) (Autor, Normalansicht)

Verändert: 250c250,251
DRI scheint nur mit 1024x768 ordentlich zu funktionieren
DRI:
* überprüfen ob man zugriff auf /dev/agpgart hat und das Kernelmodul i915 geladen ist bzw. der Kernel diesen Chip unterstützt

Verändert: 252,255c253,254
Workaround:
[[Code]
...
]
Dualhead:
* Läuft sehr gut! Verwende 1280x1024 zum arbeiten und 1024x768 zum Movie schauen (sogar mit Xinerama:-) der Treiber wird demnächst im Xorg Projekt zur Verfügung gestellt das Update wird einen Fatalen Xvideo Bug 1280x1024 beheben, sowie Xinerama support ermöglichen.

Acer Travelmate 662 LMi

Spezifikation

 Intel Pentium M 1,5 Ghz
 Intel 855GM Chipset
 Intel Pro/Wireless 2100 (802.11 b WLAN)
 10/100 Ethernet
 56Kbps V.92 Modem
 60 GB Ultra ATA/100 HDD
 DVD-RW/CD-RW
 512MB DDR SDRAM
 Smart Card Reader
 Windows XP Home OEM
 15" SXGA+-TFT LCD (1280x1024 - negativ interpoliert aber ok)
 4 x USB
 FireWire?
 PCMCIA

USB2 ext hdd

since 60gb are kinda too small for a life in 2005 I got a ~220 gib maxtor usb2.0 hdd.. works fine with that notebook 10mib/s transfer rate from the notebook to the usb harddisc

Linux

Initialinstallation:

 Debian Sarge Netinst
 Netzwerkkarte (Broadcom Corporation BCM4401 100Base-T) wurde ohne Probleme erkannt, sodass ich anschließend sofort auf Debian SID sowie den aktuellsten Kernel upgedated habe.

DVD+/- R(W)/CD R(W)
benötigte module: ide_cdrom

CDs brennen:

debian:/# cdrecord dev=ATAPI -scanbus
Cdrecord-Clone 2.01a38 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an unofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <cdrtools@packages.debian.org>.
      The original author should not be bothered with problems of this version.

cdrecord: Warning: Running on Linux-2.6.11.5
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'ubuntu-0.8ubuntu1'.
cdrecord: Warning: using unofficial version of libscg (ubuntu-0.8ubuntu1 '@(#)scsitransp.c      1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
scsibus0:
        0,0,0     0) 'PIONEER ' 'DVD-RW DVR-K12RA' '1.10' Removable CD-ROM
        0,1,0     1) *
        0,2,0     2) *
        0,3,0     3) *
        0,4,0     4) *
        0,5,0     5) *
        0,6,0     6) *
        0,7,0     7) *

debian:/devel# cdrecord -tao dev=ATAPI:0,0,0 test.iso 
Cdrecord-Clone 2.01a38 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an unofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <cdrtools@packages.debian.org>.
      The original author should not be bothered with problems of this version.

cdrecord: Warning: Running on Linux-2.6.11.5
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: 'ATAPI:0,0,0'
devname: 'ATAPI'
scsibus: 0 target: 0 lun: 0
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'ubuntu-0.8ubuntu1'.
cdrecord: Warning: using unofficial version of libscg (ubuntu-0.8ubuntu1 '@(#)scsitransp.c      1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'PIONEER '
Identifikation : 'DVD-RW DVR-K12RA'
Revision       : '1.10'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Starting to write CD/DVD at speed 16 in real TAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Turning BURN-Free off
Track 01: Total bytes read/written: 32145408/32145408 (15696 sectors).

dvds brennen:
debian:/devel# growisofs -dvd-compat -Z /dev/hdc=test.iso
Executing 'builtin_dd if=test.iso of=/dev/hdc obs=32k seek=0'
/dev/hdc: "Current Write Speed" is 2.5x1385KBps.
   1605632/32145408 ( 5.0%) @0.0x, remaining 2:13
   1605632/32145408 ( 5.0%) @0.0x, remaining 3:10
   1605632/32145408 ( 5.0%) @0.0x, remaining 4:07
   1605632/32145408 ( 5.0%) @0.0x, remaining 5:23
   1605632/32145408 ( 5.0%) @0.0x, remaining 6:20
   8585216/32145408 (26.7%) @1.5x, remaining 1:03
  19660800/32145408 (61.2%) @2.3x, remaining 0:17
  29622272/32145408 (92.2%) @2.1x, remaining 0:02
builtin_dd: 15696*2KB out @ average 0.7x1385KBps
/dev/hdc: flushing cache
/dev/hdc: closing track
/dev/hdc: closing disc
debian:/devel# mount /dev/hdc /dvd
mount: block device /dev/hdc is write-protected, mounting read-only
debian:/devel# cd /dvd
debian:/dvd# ls
boot.catalog  debian  dists  md5sum.txt  TRANS.TBL

Probleme am Anfang (durch falsche Installation, SCSI Emulation):

debian:/devel# dvdrecord dev=ATAPI:0,0,0 test.iso
dvdrtools v0.1.5
Portions (c) 2002-2003 Ark Linux <bero@arklinux.org>
dvdrtools patched by Julien Delange for Debian 
Note that you have to reports bug to the debian maintainer
Please ask Debian for support, and not ask the original author
This program is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
A PARTICULAR PURPOSE.  See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with
this program; see the file COPYING.  If not, write to the Free Software
Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
Based on:
dvdrtools v0.1.5
Cdrecord 1.11a15 (i386-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
scsidev: 'ATAPI:0,0,0'
devname: 'ATAPI'
scsibus: 0 target: 0 lun: 0
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Using libscg version 'schily-0.7'
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'PIONEER '
Identifikation : 'DVD-RW DVR-K12RA'
Revision       : '1.10'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE 
Supported modes: PACKET SAO
Starting to write CD/DVD at speed 2 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
trackno=0
dvdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 3D F6 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 21 02 00 00 00 00 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.005s timeout 200s
write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 0E 00 00 00 00 00 00 00 00 00 00
--- das scsi modul wurde auch hier nicht nachgeladen was einen eventuellen fehler verursachen hätte können --
debian:/devel# lsmod
Module                  Size  Used by
nls_cp437               5696  0 
isofs                  36920  0 
sr_mod                 17956  0 
md5                     4032  1 
ipv6                  270080  6 
b44                    23492  0 
mii                     4992  1 b44
sd_mod                 17808  0 
usb_storage            71552  0 
audio                  49792  0 
usb_midi               25156  0 
uhci_hcd               33424  0 
ohci_hcd               22472  0 
ehci_hcd               33544  0 
snd_usb_audio          68096  1 
snd_usb_lib            13504  1 snd_usb_audio
usbcore               123192  9 usb_storage,audio,usb_midi,uhci_hcd,ohci_hcd,ehci_hcd,snd_usb_audio,snd_usb_lib
snd_rawmidi            25056  1 snd_usb_lib
snd_pcm_oss            54432  1 
snd_pcm                96968  2 snd_usb_audio,snd_pcm_oss
snd_timer              26628  1 snd_pcm
snd_page_alloc         10116  1 snd_pcm
snd_mixer_oss          20608  1 snd_pcm_oss
snd                    57828  6 snd_usb_audio,snd_rawmidi,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore              10592  4 audio,usb_midi,snd
sg                     40416  0 
scsi_mod              139272  4 sr_mod,sd_mod,usb_storage,sg
ide_cd                 42180  0 
unix                   29748  72 
cdrom                  41632  2 sr_mod,ide_cd

Graphikchip

[drm] Initialized i830 1.3.2 20021108 on minor 0: Intel Corp. 82852/855GM Integrated Graphics Device
[drm] Initialized i830 1.3.2 20021108 on minor 1: Intel Corp. 82852/855GM Integrated Graphics Device (#2)

DRM funktioniert, XFree läuft nur mit 1024x786, Xorg mit 1280x1024 - es sind keine Bios Patches notwendig

Workaround:
Xorg installieren

gab probleme mit XSession, eine funktion namens run_parts wurde nicht gefunden - anscheinend wurde die Installation hier nicht richtig abgeschlossen - die Funktion fand sich jedenfalls in /etc/X11/Xsession.dpkg-dist

Die Maus scheint nach einer Standardinstallation etwas zu empfindlich zu sein

Workaround:
Falls es folgenden Eintrag in der xorg.conf file gibt:

#Section "InputDevice"
#       Identifier      "Generic Mouse"
#       Driver          "mouse"
#       Option          "Se<ndCoreEvents"        "true"
#       Option          "Device"                "/dev/input/mice"
#       Option          "Protocol"              "ImPS/2"
#       Option          "Emulate3Buttons"       "true"
#       Option          "ZAxisMapping"          "4 5"
#EndSection

DRI:

 * überprüfen ob man zugriff auf /dev/agpgart hat und das Kernelmodul i915 geladen ist bzw. der Kernel diesen Chip unterstützt

Dualhead:
 * Läuft sehr gut! Verwende 1280x1024 zum arbeiten und 1024x768 zum Movie schauen (sogar mit Xinerama:-) der Treiber wird demnächst im Xorg Projekt zur Verfügung gestellt das Update wird einen Fatalen Xvideo Bug 1280x1024 beheben, sowie Xinerama support ermöglichen.

SD Cardreader

0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)

Funktioniert Die SD Karte von meiner Digicam lässt sich ohne Probleme mounten

Audio

Eingebauter Soundchip wird sehr gut unterstützt

Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)

USB

Die 4 USB 2.0 Anschlüsse werden ebenfalls unterstützt (Creative SB Extigy läuft darüber ziemlich problemlos wenn auch nicht komplett unterstützt)

Network

Funktioniert, inklusive WLAN

0000:02:02.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
0000:02:04.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)

Treiber ipw2100 (Bei Problemen versuchen den Wireless Button zu drücken und somit WLAN einzuschalten, versuchen mit Kismet Netze zu scannen)

Modem wurde noch nicht getestet

IRDA

Die Irda Device hängt an /dev/ttyS1

setserial /dev/ttyS1 uart none irq 0 port 0
modprobe nsc-ircc
dmesg
----
nsc-ircc, Found chip at base=0x04e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Found dongle: HP HSDL-1100/HSDL-2100
----
irattach irda0 -s
irdadump
----
0:16:59.137786 xid:cmd b776d9bb > ffffffff S=6 s=* debian hint=0400 [ Computer ] (22) 
00:17:01.597421 xid:cmd b776d9bb > ffffffff S=6 s=0 (14) 
00:17:01.687399 xid:cmd b776d9bb > ffffffff S=6 s=1 (14) 
00:17:01.769550 xid:rsp b776d9bb < 00002185 S=6 s=1 Nokia 6610i hint=b125 [ PnP Modem Fax Telephony IrCOMM IrOBEX ] (28) 
----

Probleme

Keine soweit, USB Midi Treiber erzeugt Backtraces


StartSeite | MarkusRechberger/ | Neues | TestSeite | ForumSeite | Teilnehmer | Kategorien | Index | Hilfe | Einstellungen | Ändern
Text dieser Seite ändern (zuletzt geändert: 13. Mai 2005 2:20 (diff))
Suchbegriff: gesucht wird
im Titel
im Text